iData K1S
iData K1S
Time-tested & cost-effective option. Android Keyboard/Touch-control Terminal
iData K1S is an ultra-rugged Android keyboard-type smart terminal, which is time-tested in many scenarios such as new retail business,
warehouses, manufacturing plants, express and logistics, etc. It improves the working capacity without increasing your purchase cost.
By adding a pistol grip, K1S is able to deal with high-frequency scanning in inventory process.
- Description
- Technical Specifications
- Schedule a demo
Multifunctional to meet requirements of different scenes
Equipped with iData's self-developed scanning engine, K1S can easily scan damaged, dirty, DPM barcodes, etc. The breakthrough Wi-Fi roaming
technology, as well as the 5G PA amplifier, enable a better network experience in complex environments.
Battery life designed for 1.5 shifts
The 4400mAh large battery can be used for 12 hours, which can meet the needs of long shifts and reduce the loss caused by equipment downtime. The battery is detachable so that it can work continuously right after the battery replacement.
Enterprise-level protection to reduce malfunction losses
IP65 makes the equipment waterproof, dustproof, rainproof and snow-proof. It can work the sun and rain environments outdoors. The 1.5-meter anti-drop design enables users to mount the equipment on forklifts, shelves and other heights confidently. This device is designed to survive accident drops.
| Processor | Octa-core 2.0GHz high-performance processor |
| Operating System | Android 9.0 (GMS) / Android 11.0 (GMS) |
| Memory (ROM + RAM) | 64GB + 4GB (standard） |
| SIM | Single SIM card |
| Expansion Slot | Micro SD card (up to 256 GB) |
| Display Screen | 4-inch, resolution: 800*480 pixels |
| Touch Screen | Industrial capacitive screen, support wet-hand operation/glove mode/multi-touch/gesture operation |
| Camera | 13 megapixels of rear camera, support auto-focusing/PDAF |
| Flashlight | 800mA flashlight |
| Keypad | 26 keypads: front key*23, side scan key *2, side power key *1 |
| Keyboard Backlight | White |
| Battery | 3.8V lithium battery, with 4400mAh, detachable, backupbattery support (available for some models) |
| Audio | Built-in microphone |
| Charging Method | Type-C charging and pin port charging |
| Reminder | Vibration reminder/LED reminder |
| Vibrating Motor | Built-in vibrating motor |
| Sensors | G-sensor/ Proximity sensor/Light sensor |
| Intercom Function (Optional) | Support one-button PTT calls |
| Dimension (L*W*D) | 168mm*71mm*26mm |
| Weight | 270g (including the battery) |
| Working Temperature | -20℃ - 60℃ *Do not charge under low temperature conditions for the safety concerns |
| Storage Temperature | -40℃ - 70℃ (without the battery) |
| Humidity | 0 - 95% (no moisture condensation) |
| Drop Specification | Multiple drops to concrete floor from the height of 1.5m |
| Roller Drop Specification | 1000 times of roller drops from a height of 0.5 meter |
| Ingress Protection | IP65 |
| ESD Protection | ±15KV (air discharge), ±8KV (contact discharge) |
| USB Interface | Type-C (with headset function) *1 |
| OTG Interface | Support |
| Barcode Type | It can scan one-dimensional / two-dimensional barcodes |
| Scanning Accuracy | ≧3.33mil |
| Scanning Angle | Pitch: ±60°； Skew：±45°； Tilt：360° |
| View Angle | Horizontal：44.3°，Vertical：28.4°，Diagonal：51° |
| Motion Error Tolerance | 8m/s |
| WWAN (Network Frequency) | China & Eurasian version: 2G: B2/B3/B5/B8 3G: WCDMA: B1/B5/B8, CDMA&EVDO: BC0, TD-SCDMA: B34/B39 4G: FDD-LTE: B1/B3/B5/B7/B8/B20，TDD-LTE: B34/B38/B39/B40/B41 American version: 2G: B2/B3/B5 3G: B1/B2/B4/B5，CDMA&EVDO：BC0/BC1 (U.S.) 4G: B1/B2/B3/B4/B5/B7/B12/B17/B28A/B28B/B41 |
| WWAN (Data Service) | GSM/GPRS/EDGE/CDMA/UMTS/HSPA/HSPA+/EVDO /WCDMA/TD-SCDMA/TDD-LTE/FDD-LTE |
| WLAN Function | Wi-Fi 802.11a/b/g/n/r/ac/i/k/v (2.4G + 5G dual-band Wi-Fi), support Wi-Fi 5G PA amplifier |
| Bluetooth | Bluetooth 5.0, support BLE |
| GPS | GPS/AGPS/BDS/Galileo/GLONASS/QZSS |
| Working Frequency | 13.56 MHz |
| Reading Distance | Within 30mm |
| Communication Protocol | ISO14443A/14443B/15693 |
| Programming Language | Java |
| Development API | iScan API (Scanning Development Kits), Device API (Device Management/Configuration Development Kits), Android Standard Interface |
| Development Tool | Eclipse/Android Studio |
| Standard Accessories | USB cable*1, power adapter*1, hand strap*1, device-back strap*1, battery*1 |
| Optional Accessories | Single charging cradle, bottom charger, 4-slot charging cradle, 4-slot battery charging cradle, pistol grip, fanny pack, protective film, protective case |
