iData K1 Cold
iData K1 Cold
Low temperature resistant and anti-condensation smart terminal. Cost-effective cold-chain dedicated terminal Low temperature resistant and anti-condensation smart terminal iData K1 Cold is able to withstand the low temperature impact of -25℃ and resist moderate condensation. It’s suitable for workers who travel through areas which are not too humid in the cold storage. With the engine that scans ultra-long distance, the working efficiency of forklifts can be improved significantly.
- Description
- Technical Specifications
- Schedule a Demo
Vacuum-coated technology can resist condensation
The internal of scan window and screen has been vacuum-coated by anti-condensation film, so that the device can resist moderate condensation
effectively. Thus, the workers who work in the cold storage for a long time, or travel between refrigerated area and frozen area, can avoid working delay due to the condensation.
Survive longtime working in low temperature area
The 6700mAh cold-chain dedicated battery can assure battery discharge capacity in -25℃ environment for over 12 hours. The workers who need to work in refrigerated area or frozen area for long hours can scan confidently without worrying about the battery life.
Improve forklift efficiency in goods locating and sortingIP65
Support up to 21.4m furthest scanning, the forklift can scan the barcodes of the shelves and goods in a long distance. It can connect the goods with the corresponding shelves quickly in the inbound management and confirm the goods information in the outbound sorting.
| Processor | Octa-core 2.0GHz high-performance processor |
| Operating System | Android 9.0/Android 11.0 |
| Memory (ROM+RAM) | 64GB+4GB (standard) |
| SIM | Single SIM card |
| Expansion Slot | Micro SD card (up to 256GB) |
| Display Screen | 4-inch, resolution: 800*400 pixels |
| Touch Screen | Industrial capacitive screen, support wet-hand operation/glove mode/multi-touch/gesture operation |
| Camera | 13 megapixels of rear camera, support auto-focusing/PDAF |
| Flashlight | 800mA flashlight |
| Keypad | 26 keypads in total: front key*23, side scan key *2, side power key *1, (Interior transmission light industrial IMD keypad) |
| Keyboard Backlight | White |
| Battery | 4.2V lithium battery, with 6700mAh, detachable, backup battery support *Don’t replace battery in cold environments in case the cold moisture will damage the device |
| Audio | Built-in microphone |
| Charging Method | Type-C charging and pin port charging, support 12W fast charging |
| Reminder | High-power speaker/Vibration reminder/LED reminder |
| Vibration Motor | Built-in vibration motor |
| Sensors | G-sensor/ Proximity sensor/Light sensor |
| ntercom Function (Optional) | Support one-button PTT calls |
| Dimension (L*W*D) | 168mm *71mm *33mm |
| Weight | 342g (including the battery) |
| Working Temperature | -25℃ - 50℃ *Do not charge under low temperature conditions for the safety concerns |
| Storage Temperature | -40℃ - 70℃ (without the battery) |
| Humidity | 0 - 95% (no moisture condensation) |
| Drop Specification | Multiple drops to concrete floor from the height of 1.5m |
| Roller Drop Specification | 1000 times of roller drops from a height of 0.5 meter |
| Ingress Protection | IP65 |
| ESD Protection | ±15KV (air discharge), ±8KV (contact discharge) |
| USB Interface | Type-C (with headset function) *1 |
| OTG Interface | Support |
| Barcode Type | It can scan one-dimensional / two-dimensional barcodes |
| Scanning Accuracy | ≧3.33mil |
| Scanning Angle | Pitch: ±60°； Skew：±45°； Tilt：360° |
| View Angle | Horizontal：44.3°，Vertical：28.4°，Diagonal：51° |
| Motion Error Tolerance | 8m/s |
| WWAN (Network Frequency) | Chinese & Eurasian version: 2G: B2/B3/B5/B8 3G: WCDMA: B1/B5/B8, CDMA&EVDO: BC0, TD-SCDMA: B34/B39 4G: FDD-LTE: B1/B3/B5/B7/B8/B20，TDD-LTE: B34/B38/B39/B40/B41 American version: 2G: B2/B3/B5 3G: B1/B2/B4/B5，CDMA&EVDO：BC0/BC1 (U.S.) 4G: B1/B2/B3/B4/B5/B7/B12/B17/B28A/B28B/B41 |
| WWAN (Data Service) | GSM/GPRS/EDGE/CDMA/UMTS/HSPA/HSPA+/EVDO /WCDMA/TD-SCDMA/TDD-LTE/FDD-LTE |
| WLAN Function | Wi-Fi 802.11a/b/g/n/r/ac (2.4G + 5G dual-band Wi-Fi), support Wi-Fi 5G PA amplifier |
| Bluetooth | Bluetooth 5.0, support BLE |
| GPS | GPS/AGPS/BDS/Galileo/GLONASS/QZSS |
| Working Frequency | 13.56 MHz |
| Reading Distance | Within 30 mm |
| Communication Protocol | ISO14443A/14443B/15693 |
| Programming Language | Java |
| Development API | iScan API (Scanning Development Kits), Device API (Device Management/Configuration Development Kits), Android Standard Interface |
| Development Tool | Eclipse/Android Studio |
| Standard Accessories | USB cable*1, power adapter*1, hand strap*1, device-back strap*1, battery*1 |
| Optional Accessories | Single charging cradle, bottom charger, 4-slot charging cradle, 4-slot battery charging cradle, pistol grip, protective film, protective case |
