iData 50 UHF
iData 50 UHF
Detachable High-performance RFID Terminal. Flexible to meet needs of workers. Detachable High-performance RFID Terminal.
iData 50 UHF is a detachable high-performance RFID terminal. By adding an RFID reading module, the equipment can obtain powerful
RFID reading capabilities. The workers can either attach RFID grip, or just use the smart terminal flexibly based on different operation
requirements.
- Description
- Technical Specifications
- Schedule a Demo
Powerful detachable RFID grip
With a detachable UHF RFID grip, and a high-sensitivity circularly polarized antenna, iData 50 can read up to 10m distance and the rate can reach up to 700tags/s. This enables iData 50 to work faster in either inventory of apparel store, or goods inbound and outbound management.
Flexible power supply; Optimized battery life
The main unit comes with a 4000mAh battery, while the grip equipped with a 5200mAh battery. The grip battery can also support charging of main unit. In the case of apparel store management, the device may run out of battery after a whole day concentrating on customer service, however with the help of grip battery, the device can work on inventory non-stop immediately.
Multiple network to meet different requirements
4G WAN and Wi-Fi network enable workers to enjoy the convenience of mobile operations in different scenarios, such as outdoor inspections, asset
management, or indoor inventory, inbound and outbound management.
| Processor | Octa-core 2.0GHz high-performance processor |
| Operating System | Android 9.0/Android 11.0(GMS) |
| Memory (ROM+RAM) | 64GB + 4GB (standard), 16GB + 2GB (optional) |
| SIM | Single SIM card |
| Expansion Slot | Micro SD card (up to 256 GB) |
| Display Screen | 4.7-inch, resolution: 1280*720 pixels |
| Touch Screen | Industrial capacitive screen, support wet-hand operation/glove mode/multi-touch/gesture operation |
| Camera | 13 megapixels rear camera, support auto-focus/PDAF, 5 megapixels front camera compatible |
| Flashlight | 800mA flashlight |
| Keypad | 9 keypads in total: front key*4, side scan key *2, power key *1, side custom key *2 |
| Battery | Main unit : 3.85V lithium battery, with 4000mAh, detachable Pistol grip: 3.6V lithium battery, with 5200mAh, embedded |
| Audio | Built-in microphone |
| Charging Method | Type-C and Pin-port charging, support 24W fast charging |
| Reminder | Vibration reminder/LED reminder/Audio reminder |
| Vibrating Motor | Built-in vibrating motor |
| Sensors | G-sensor/Proximity sensor/Light sensor |
| Intercom Function (optional) | Support one-button PTT calls |
| Dimension (L*W*D) | PDA + Pistol grip: 175mm*89mm*165mm; Pistol grip is detachable |
| Weight | PDA (with battery)+ Pistol grip(with RFID): 710g PDA (with battery)+ Pistol grip(without RFID): 530g |
| Working Temperature | -20℃ - 60℃ *Do not charge under low temperature conditions for the safety concerns |
| Storage Temperature | -40℃ - 70℃ (without battery ) |
| Humidity | 0 - 95% (no moisture condensation) |
| Drop Specification | Multiple drops to concrete floor from the height of 1.5m |
| Ingress Protection | IP65 |
| ESD Protection | ±15KV (air discharge), ±8KV (contact discharge) |
| USB Interface | Type-C (with headset function) *1 |
| OTG Interface | Support |
| PIN Interface | Pin port (on the back of main unit)*1 |
| Barcode Type | It can scan one-dimensional / two-dimensional barcodes |
| Scanning Accuracy | ≧3.33mil |
| Scanning Angle | Pitch: ±60°； Skew：±45°； Tilt：360° |
| View Angle | Horizontal：44.3°，Vertical：28.4°，Diagonal：51° |
| Motion Error Tolerance | 8m/s |
| WWAN (Network Frequency) | China & Eurasian version: 2G: B2/B3/B5/B8 3G: WCDMA: B1/B5/B8, CDMA&EVDO: BC0, TD-SCDMA: B34/B39 4G: FDD-LTE: B1/B3/B5/B7/B8/B20，TDD-LTE: B34/B38/B39/B40/B41 American version: 2G: B2/B3/B5 3G: B1/B2/B4/B5，CDMA&EVDO：BC0/BC1 (U.S.) 4G: B1/B2/B3/B4/B5/B7/B12/B17/B28A/B28B/B41 |
| WWAN (Data Service) | GSM/GPRS/EDGE/CDMA/UMTS/HSPA/HSPA+/EVDO /WCDMA/TD-SCDMA/TDD-LTE/FDD-LTE |
| WLAN Function | Wi-Fi 802.11ac/a/b/g/n/r (2.4G + 5G dual-band Wi-Fi) support Wi-Fi 5G PA amplifier |
| Bluetooth | Bluetooth 5.0 |
| GPS | GPS/AGPS/BDS/Galileo/GLONASS |
| Communication Protocol | ISO18000-6B/6C/6D |
| Frequency | 920MHz~925MHz/902MHz~928MHz/865MHz~868MHz |
| Output Power | 5~30dBm |
| Antenna | Circularly polarized antenna |
| Reading Distance | Up to 10m |
| Reading Rate | Up to 700tags/s |
| Working Frequency | 13.56 MHz |
| Reading Distance | Within 30 mm |
| Communication Protocol | ISO14443A/14443B/15693 |
| Programming Language | Java |
| Development API | iScan API (Scanning Development Kits), Device API (Device Management/Configuration Development Kits), Android Standard Interface |
| Development Tool | Eclipse/Android Studio |
| Standard Accessories | USB cable*1, power adapter*1, battery*1 |
| Optional Accessories | 3-in-1 charging cradle, protective film |
