iData P1
iData P1
Enterprise-level Smart Terminal. Upgrade leading-edges of enterprise workers. iData P1 is a new generation of industrial Android tablet. It features large screen, ultra-thin, sturdy, high performance and high
expansion. It supports the expansion of external accessories on the back, bottom and right side. It can be used in both fixed and mobile
way. It has been widely used in store management, warehouse management, production management, equipment inspection etc.
- Description
- Technical Specifications
- Schedule a Demo
10.1-inch screen, convenient for users to work
Whether inventory in the warehouse or working on the production line, the large screen enables you to view the data chart clearly, and even multi-tasking. This greatly improves the work efficiency. The raised plastic around it can effectively protect the screen from falling.
Various interfaces to meet customized needs
The interfaces on the bottom, back, and right side enables the device to upgrade more functions through accessories expansion. The device can be connected to the base, screen to meet the customization needs in different scenarios.
Ultra-thin body, easy to use
Only 14.9mm in thickness, and the ultra-thin body can be easily put into bag, convenient to bring, easy to fix on the bracket and disassemble.
| Processor | Octa-core 2.0GHz high-performance processor |
| Operating System | Android 11.0/Android 13.0(GMS) |
| Memory (ROM+RAM) | 64GB + 4GB (standard) |
| SIM | Two out of three SIM card slots, support dual SIM and dual standby * Two out of three SIM card slots: two cards can be held at the same time, Nano SIM card + Nano SIM card /Nano SIM card +TF card |
| Expansion Slot | Micro SD card (up to 256 GB) |
| Display Screen | 10.1-inch, resolution: 1920*1200 pixels |
| Touch Screen | Industrial capacitive screen, support wet-hand operation/glove mode/multi-touch/gesture operation |
| Camera | 13 megapixels rear camera, support auto-focus; 8 megapixels front camera |
| Flashlight | 800mA flashlight |
| Keypad | 4 keypads in total: scan key *1, power key *1, volume key*2 |
| Battery | 3.85V lithium battery, with 10000mAh, detachable, backup battery suppor |
| Audio | Built-in dual microphone |
| Charging Method | Type-C charging and pin-port charging, support 18W fast charging |
| Reminder | Vibration reminder/LED reminder/high power speaker/audio reminder |
| Vibrating Motor | Built-in vibrating motor |
| Sensors | G-sensor/Proximity Sensor/Light sensor/Geomagnetic sensor/ Gyroscope |
| Intercom Function (Optional) | Support one-button PTT calls |
| Dimension (L*W*D) | 244.8mm *163.6mm *14.9mm |
| Weight | 879g (including the battery) |
| Working Temperature | -10℃ - 50℃ *Do not charge under low temperature conditions for the safety concerns |
| Storage Temperature | -30℃ - 70℃ (without battery) |
| Humidity | 10%- 95% (no moisture condensation) |
| Drop Specification | Multiple drops to concrete floor from the height of 1.2m |
| Roller Drop Specification | 300 times of roller drops from a height of 0.5 meter |
| Ingress Protection | IP65 |
| ESD Protection | ±15KV (air discharge), ±8KV (contact discharge) |
| Barcode Type | It can scan one-dimensional / two-dimensional barcodes |
| Scanning Accuracy | ≧3.33mil |
| Scanning Angle | Pitch: ±60°； Skew：±45°； Tilt：360° |
| View Angle | Horizontal：44.3°，Vertical：28.4°，Diagonal：51° |
| Motion Error Tolerance | 8m/s |
| WWAN (Network Frequency) | 2G：B2/B3/B5/B8 3G：WCDMA：B1/B2/B5/B8 4G： B1/B2/B3/B4/B5/B7/B8/B12/B17/B19/B20/B28A/B28B/B34/ B38/B39/B40/B41 |
| WWAN (Data Service) | GSM/GPRS/EDGE/UMTS/HSPA/HSPA+/WCDMA/TDD-LTE/FDD-LTE |
| WLAN Function | Wi-Fi 802.11a/b/g/n/r/ac (2.4G + 5G dual-band Wi-Fi) |
| Bluetooth | Bluetooth 5.0 |
| GPS | GPS/AGPS/BDS/Galileo/GLONASS |
| Working Frequency | 13.56 MHz |
| Reading Distance | Within 60 mm |
| Communication Protocol | ISO14443A/14443B/15693 |
| Programming Language | Java |
| Development API | iScan API (Scanning Development Kits), Device API (Device Management/Configuration Development Kits), Android Standard Interface |
| Development Tool | Eclipse/Android Studio |
| USB Interface | Type-C 3.0 (with headset function) *1, Type-A USB2.0*1, Micro HDMI interface *1 |
| OTG Interface | Support |
| Standard Accessories | USB cable*1, device-back strap *1, power adapter*1, battery*1 |
| Optional Accessories | Charging dock, extension dock, protective film |
